This application enables to control the digital I/O ports of the Arduino UNO microcontroller board through the USB interface of your Android device. All you need is an USB OTG cable and a proper USB cable for the connection. Through the user interface, you can make the digital pins INPUT or OUTPUT and control the LOGIC STATE of each pin by toggle buttons easily.
The Arduino software can be downloaded from the link below:
<a href="https://www.google.com/url?q=https://www.google.com/url?q%3Dhttps://gist.github.com/eeaslan/5e5373b4710bbc34e03c%26sa%3DD%26usg%3DAFQjCNGaXSVNyCvm4Sit5mYVe0taH1BdOg&sa=D&usg=AFQjCNEMkNBxgnBYpCJ05x3kjjG3KD3XXw" target="_blank">https://gist.github.com/eeaslan/5e5373b4710bbc34e03c</a>
After the installation of the application and when you connect the Arduino Uno board to your Android device, the system asks for a permission and you must give the permission to the app to use the USB interface. Otherwise it won't work.
Note: Tested on Samsung Galaxy S3 with an Arduino Uno R3 board. Please give feedback about any problems.
Caution: Please use this software at your own risk. Be sure about the electrical connections of the Arduino board to avoid any short circuits.
Keywords: Arduino, Arduino Uno, Port Control, Microcontroller, Digital Control, Touch Interface for Arduino.
</div> <div jsname="WJz9Hc" style="display:none">Diese Anwendung ermöglicht es, die digitalen I / O-Ports des Arduino UNO Mikrocontroller-Board über die USB-Schnittstelle von Ihrem Android-Gerät zu steuern. Alles, was Sie benötigen, ist ein USB-OTG-Kabel und eine richtige USB-Kabel für die Verbindung. Über die Benutzerschnittstelle, können Sie die digitale Stifte-oder Ausgang zu machen und die Kontrolle der logische Zustand eines jeden Stiftes durch Umschaltflächen leicht.
Das Arduino-Software kann unter dem folgenden Link heruntergeladen werden:
<a href="https://www.google.com/url?q=https://gist.github.com/eeaslan/5e5373b4710bbc34e03c&sa=D&usg=AFQjCNGaXSVNyCvm4Sit5mYVe0taH1BdOg" target="_blank">https://gist.github.com/eeaslan/5e5373b4710bbc34e03c</a>
Nach der Installation der Anwendung und wenn Sie das Arduino Uno Board auf Ihr Android-Gerät anschließen, fragt das System nach einer Erlaubnis und Sie müssen die Erlaubnis, die App zu geben, um die USB-Schnittstelle. Sonst wird es nicht funktionieren.
Hinweis: Getestet auf Samsung Galaxy S3 mit einem Arduino Uno R3 Bord. Bitte geben Rückmeldungen über Probleme.
Achtung: Bitte verwenden Sie diese Software auf eigene Gefahr. Seien Sie sicher über die elektrischen Anschlüsse des Arduino-Board, alle Kurzschlüsse zu vermeiden.
Stichwort: Arduino, Arduino Uno, Port Control, Mikrocontroller, digitale Steuerung, Touch-Interface für Arduino.</div> <div class="show-more-end">